ViewSonic M1 Pro - First Time Activation and Settings

28
First Time Acvaon
If the projector is acvated for the rst me, you will need to select your Preferred
Language, Projecon Orientaon, and Network Sengs. Follow the on-screen
instrucons using the OK and Up/Down/Le/Right buons on the remote control.
When the “Finish Screen” appears, this indicates the projector is ready to use.
Bluetooth Remote Pairing
1. Press and hold the Sengs and Return buon for 3 seconds to enter pairing
mode.
2. The LED on the remote control will ash blue.
3. A “Successfully Paired” message will show. If not, please try again or select Next
and go to: App Center > Bluetooth Remote app.