ViewSonic M1 Pro - Adjusting the Projected Image; Adjusting the Projectors Height and Projection Angle; Adjusting the Focus

27
Adjusng the Projected Image
Adjusng the Projector's Height and Projecon Angle
The projector is equipped with one (1) Smart Stand. Adjusng the stand will change
the projector’s height and the vercal projecon angle. Carefully adjust the stand to
ne tune the projected image’s posion.
NOTE: If the projector is not placed on a at surface or the screen and the
projector are not perpendicular to each other, the projected image can
become trapezoidal. However, the “Auto Vercal Keystone” funcon will
correct the issue automacally.
Adjusng the Focus
To adjust the focus of the on-screen image, slowly move the focus ring upwards or
downwards.