ViewSonic N3752w - Aux Key Setup

ViewSonic N3752w
12
ENGLISH
AUX Key Setup
The AUX key is used to operate a second TV, DVD, STB, VCR, VPB,WMA, and AUD.
A fourth digit is necessary to identify the type of device the key will control.
AUX Button
For example, to control a Sony DVD player with a code
of 027 under the AUX key, a 2 must be added in the
beginning of the pre-programmed code making it 2027.
If user wants to control a Philips STB with a 006 code
under the AUX key, a 3 must be added in the beginning
of the pre-programmed code making it 3006.
TV VPB
DVD WMA
STB AUD
VCR
1
2
3
4
=
=
=
=
=
=
=
5
6
7
To enter the pre-programmed code, press and hold the AUX button for approximately
6 seconds. The top LED will turn on, enter the pre-programmed code with the first
digit to indicate the type of device. LED will blink to indicate pre-programmed code
was captured correctly.
LED
AUX Button