ViewSonic N3752w - Advanced Remote Operations; PIP;POP Functionality

ViewSonic N3752w
33
ENGLISH
ADVANCED OPERATION — REMOTE CONTROL
PIP/POP
PIP/POP button allows you to watch two screens from different sources at the same time.
(PIP is picture in picture; POP is picture out of picture.)
Press PIP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.
• PIP Input Source Select
1. Press PIP Source button to select input source for sub-screen as following.
(You must press
PIP button first.)
2. Use ◄► to select the sub-input source and press ENTER to confirm.
Note: To select the input source for main screen, press SOURCES button.
• PIP Size Select: Press PIP Size to select the size of sub-screen. The function only acts on PIP.
• PIP Position Select: Press ▲ to select the position of sub-screen. The function only acts
on PIP.
Note that the screen indexed with the pink frame is the screen you select to set up.
Use ◄► to move the index between the main screen and the sub-screen.
PIP Screen POP Screen
Main Screen Available Sub-Screen Input Source
TV YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
AV YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
S-Video YPbPr / HDMI1 / HDMI2 / HDMI3 / VGA
YPbPr TV / AV / S-Video / HDMI1 / HDMI2 / HDMI3
HDMI1 / HDMI2 / HDMI3 AV / S-Video / YPbPr / VGA
VGA TV / AV / HDMI1 / HDMI2 / HDMI3