To Next PageTo Next PageWhy is my ViewSonic PA502X remote control not working?
If your ViewSonic Projector remote control isn't working, first, replace the batteries. If that doesn't solve the issue, make sure there's nothing blocking the signal between the remote and the projector. Also, ensure you're within 8 meters (26 feet) of the projector. Finally, check that the remote control code matches the projector's code and adjust if necessary.
What to do if my ViewSonic PA502X has no picture?
If your ViewSonic Projector is showing no picture, ensure that the video source is turned on and correctly connected. Also, verify that the projector is correctly connected to the input signal device by checking the connection. Finally, make sure the correct input signal is selected using the [Source] key on the projector or remote control.
How to fix a blurred image on a ViewSonic PA502X?
If your ViewSonic Projector image is blurred, use the focus function to adjust the lens focus. Additionally, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector as needed.
Why is my ViewSonic PA502X not shutting down?
If your ViewSonic Projector is not shutting down, check that the power cable is properly connected to both the projector's AC inlet and the power outlet, ensuring the outlet switch is on. Also, if you've recently tried to turn it on, wait until the cooling down process has completed before attempting to shut it down again.
General| Brightness | 3500 ANSI Lumens |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Contrast Ratio | 22, 000:1 |
| Zoom Ratio | 1.1x |
| Input Lag | 16 ms |
| Display Technology | DLP |
| Projection Size | 30" to 300" |
| Lamp Life | 15000 hours |
| Lamp Life (Normal) | 5000 hours |
| Connectivity | HDMI, VGA, Composite Video, USB |
| Inputs | HDMI, VGA, USB, Composite Video |
| Outputs | Audio Out |
Details FCC compliance rules and potential interference guidelines for the projector.
States compliance with EU EMC and Low Voltage Directives.
Guides users on how to register their product online for future needs.
Information on environmentally responsible disposal of the projector.
Lists the main features and capabilities of the projector.
Lists the accessories included in the projector package.
Illustrations showing the front and rear panels of the projector.
Illustrations showing the side panels of the projector.
Illustrations showing the top and bottom panels of the projector.
Explains the buttons and LED indicators on the projector unit.
Explains the function of each button on the projector's remote control.
Instructions for setting different remote control codes for multiple projectors.
Describes the optimal range and angle for remote control operation.
Discusses different installation locations for optimal projector placement.
Guides on connecting the projector to a computer via VGA.
Details connecting to various video sources like Component and Composite.
Explains the process of connecting the projector using HDMI.
Guides on connecting the projector via Component Video.
Explains the steps for connecting via composite video.
Steps to turn on and start the projector, including initial setup.
Explains how to navigate and use the on-screen display (OSD) menu.
Guides on how to set up a security password for the projector.
Explains procedures and consequences for forgotten passwords.
Instructions for changing the existing projector password.
How to adjust the projector's height and projection angle.
How to use focus and zoom rings for image clarity and size.
How to change the image aspect ratio to suit the source or display.
How to choose different picture modes for optimal display.
Calibrates color for non-white projection surfaces.
Covers adjustments for brightness, contrast, color, tint, and sharpness.
Enhances brightness and vibrancy of projected image.
Reduces electrical noise for clearer images.
Options for adjusting and setting preferred color temperature.
Prevents accidental changes to projector settings via panel buttons.
Options for managing lamp mode and resetting lamp timer.
Adjusts lamp power for efficiency and lifespan.
Configures automatic shutdown when no input is detected.
Sets automatic projector shutdown after a set time period.
Activates power-saving modes like Eco and SuperEco.
Instructions to contact service for lamp replacement.
How to use the projector in high-altitude environments.
How to select appropriate 3D sync formats for proper projection.
Steps to safely turn off the projector.
Overview of the OSD menu structure and available options.
Details the Display menu functions and settings.
Details the Image menu functions and settings.
Details the Power Management menu functions.
Details the Basic menu functions and settings.
Details the Advanced menu functions and settings.
Details the System menu functions and settings.
Details the Information menu options.
Covers cleaning, storing, and transporting the projector.
Solutions for issues with powering down the projector.
Troubleshooting steps for no image display.
Solutions for blurry or unfocused images.
Steps to resolve remote control issues.
Lists technical specifications of the projector's terminals and features.
Details for mounting the projector on a ceiling.
Lists IR command codes for remote control functions.
Lists the address codes for projector communication.
Details RS232 interface pin assignments and communication protocols.
Outlines what the warranty protects against and its general terms.
Specifies the general warranty duration and coverage.
Details warranty terms for heavy usage conditions.
Lists items and conditions excluded from warranty coverage.
Provides instructions on obtaining service under warranty.
States limitations on implied warranties.
Defines liability limitations for damages.
Explains how local laws affect warranty rights.
Outlines what the warranty protects against in Mexico.
Specifies the warranty duration and terms for Mexico.
Lists items excluded from warranty coverage in Mexico.
Provides instructions for obtaining warranty service in Mexico.
