To Next PageTo Next PageHow to fix ViewSonic Projector that does not turn on?
If your ViewSonic Projector doesn't turn on, first, make sure the power cord is securely connected to both the projector and the power outlet. If the projector is still cooling down, wait for the process to complete before attempting to turn it on again. If it still fails to power on, try using a different power outlet or testing the current outlet with another electrical device.
Why is my ViewSonic PA700W Projector remote control not working?
If the remote control isn't working with your ViewSonic Projector, first ensure that there are no obstructions between the remote and the projector, and that you're within the operational range. If it still doesn't work, the batteries may be depleted; check and replace them if necessary.
What to do if my ViewSonic PA700W has no picture?
If there's no picture displaying on your ViewSonic Projector, ensure that the video source cable is properly connected and that the video source itself is turned on. If the input source isn't automatically selected, manually choose the correct source using the “Source Input” option on either the projector or the remote control.
How to fix a blurred image on ViewSonic PA700W Projector?
If the image on your ViewSonic Projector appears blurred, try adjusting the focus using the Focus Ring to correctly focus the projection lens. Also, ensure that the projector and screen are properly aligned. If necessary, adjust the projector's height, projection angle, and direction.
What to do if ViewSonic PA700W Projector stops responding?
If your ViewSonic Projector stops responding to all controls, turn it off and unplug the power cord. Wait for at least 20 seconds, then reconnect the power cord and try again.
How to correct a reversed image on ViewSonic Projector?
To correct a reversed image on your ViewSonic Projector, open the OSD Menu and navigate to Setup > Projection. From there, adjust the projection option to the correct setting.
General| Number of colors | 1.07 billion colors |
|---|---|
| Projection distance | 1 - 11.11 m |
| Vertical scan range | 23 - 120 Hz |
| Projection technology | - |
| Contrast ratio (typical) | 12500:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | -40 - 40 ° |
| Focus | Manual |
| Offset | 112.4 % |
| Throw ratio | 1.544 - 1.72 |
| Digital zoom | 2 x |
| Optical zoom | 1.1 x |
| Zoom capability | Yes |
| Focal length range | 21.85 - 24 mm |
| Aperture range (F-F) | 2.41 - 2.53 |
| Noise level | 34 dB |
| HDCP version | 1.4 |
| Number of OSD languages | 22 |
| Noise level (economic mode) | 25 dB |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, KOR, POL, POR, RUS, THA, TUR, VIE |
| Image lag time | 33.2 ms |
| RMS rated power | 3 W |
| Number of built-in speakers | 1 |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Education |
| Cable lock slot type | Kensington |
| Lamp type | UHP |
| Lamp power | 240 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 12000 h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 295 W |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1080 (HD 1080) |
| Composite video in | 0 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Operating temperature (T-T) | 0 - 40 °C |
| Cables included | AC, VGA |
| Remote control type | IR |
Weight and Dimensions| Depth | 234 mm |
|---|---|
| Width | 309 mm |
| Height | 115 mm |
| Weight | 2700 g |
| Package depth | 337 mm |
| Package width | 400 mm |
| Package height | 168 mm |
| Package weight | 3800 g |
Details the function of each button on the projector's remote control.
Explains advanced remote control features like mouse mode and page control.
Guidance on selecting an optimal location and orientation for projector placement.
Instructions for connecting the projector to a power source.
Guides for connecting various external devices via different ports.
Step-by-step guide to powering on the projector.
How to adjust the projector's feet for optimal height and projection angle.
Overview of the projector's on-screen display menu structure.
Instructions on how to navigate and use the projector's OSD menus.
Details on adjusting image-related settings within the OSD.
