ViewSonic PA700W - Shutting Down the Projector

42
Shung Down the Projector
1. Press the Power buon on the projector or remote control and a “power o
message” will appear.
NOTE: The projector cannot be turned o within one minute aer starng.
2. Press the Power buon again to conrm and shut down the projector.
NOTE: The cooling fans will connue to operate for about 10 seconds for the
cooling cycle and the Power Indicator Light will ash blue.
3. The Power Indicator Light will turn solid red and enter standby mode.
NOTE: If you wish to turn the projector back on, you must wait unl the cooling
cycle has nished and the projector has entered standby mode. When
the projector is in standby mode, simply press the Power buon again to
turn on the projector.