EasyManuals Logo

ViewSonic PA700W User Manual

ViewSonic PA700W
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
66

This secon describes some common problems that you may experience when
using the projector.
 
The projector does not
turn on
Ensure the power cord is properly aached to the
projector and to the power outlet.
If the cooling process has not completed, please
wait unl it has nished then try to turn on the
projector again.
If the above does not work, try another power
outlet or another electrical device with the same
power outlet.
There is no picture
Ensure the video source cable is connected
properly, and that the video source is turned on.
If the input source is not selected automacally,
select the correct source with the “Source Input
on either the projector or the remote control.
The image is blurred
Adjusng focus with the Focus Ring will help
correctly focus the projecon lens.
Ensure the projector and screen are aligned
properly. If necessary, adjust the height of the
projector as well as the projecon angle and
direcon.
The image is reversed
Open the OSD Menu and go to:  > 
and adjust the projecon opon.
The image is stretched
when projecng a 16:9
DVD
When you play an anamorphic DVD or 16:9 DVD,
the projector will show the best image in 16:9.
If you play a 4:3 format DVD tle, please change
the format as 4:3 in projector OSD Menu.
Please setup the display format as 16:9 (wide)
aspect rao on the DVD player.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic PA700W and is the answer not in the manual?

ViewSonic PA700W Specifications

General IconGeneral
Number of colors1.07 billion colors
Projection distance1 - 11.11 m
Vertical scan range23 - 120 Hz
Projection technology-
Contrast ratio (typical)12500:1
Screen size compatibility30 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-40 - 40 °
FocusManual
Offset112.4 %
Throw ratio1.544 - 1.72
Digital zoom2 x
Optical zoom1.1 x
Zoom capabilityYes
Focal length range21.85 - 24 mm
Aperture range (F-F)2.41 - 2.53
Noise level34 dB
HDCP version1.4
Number of OSD languages22
Noise level (economic mode)25 dB
On Screen Display (OSD) languagesARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, KOR, POL, POR, RUS, THA, TUR, VIE
Image lag time33.2 ms
RMS rated power3 W
Number of built-in speakers1
Product typeStandard throw projector
Product colorWhite
Market positioningEducation
Cable lock slot typeKensington
Lamp typeUHP
Lamp power240 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)12000 h
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)295 W
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNTSC, PAL, SECAM
Supported graphics resolutions640 x 480 (VGA), 1920 x 1080 (HD 1080)
Composite video in0
HDMI connector typeFull-size
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating temperature (T-T)0 - 40 °C
Cables includedAC, VGA
Remote control typeIR
Weight and Dimensions IconWeight and Dimensions
Depth234 mm
Width309 mm
Height115 mm
Weight2700 g
Package depth337 mm
Package width400 mm
Package height168 mm
Package weight3800 g

Related product manuals