To Next PageTo Next PageWhat to do if ViewSonic PA503SP Projector remote control does not work?
If your ViewSonic Projector's remote control isn't working, here are a few things to try: * First, replace the battery with a new one. * Make sure there's nothing blocking the path between the remote and the projector. * Ensure you're within 8 meters (26 feet) of the projector. * Finally, check and adjust the remote control code to ensure it's consistent with the projector.
How to fix ViewSonic Projector that does not turn on?
If your ViewSonic Projector isn't turning on, consider these potential causes: * Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
Why ViewSonic Projector has no picture?
If your ViewSonic Projector displays no picture, several factors could be the cause: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify that the projector is correctly connected to the input signal device. * Confirm that the correct input signal is selected using the Source key on the projector or remote control.
Why is my ViewSonic PA503SP Projector image blurred?
If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * Adjust the focus of the lens using the focus ring. * Make sure the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector if needed.
General| Type | lamp |
|---|---|
| Color | white |
| Display | dlp |
| White Brightness | 3500 lumens |
| Resolution | 600p |
| Native Resolution | 800 x 600 |
| Contrast Ratio | 22000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio Range | 1.96 - 2.15:1 |
| 3D | yes |
| Minimum Screen Size | 29.9 inches |
| Maximum Screen Size | 300 inches |
| Focus Adjustment | manual |
| HDMI Ports | 1 |
| RS-232 Port | 1 |
| Video Input | vga, composite video, hdmi |
| Inputs | mini-usb, hdmi, vga, composite video, rca, 3.5mm audio |
| Remote Control | yes |
| OS Compatibility | mac, windows |
Weight and Dimensions| Depth | 8.6 inches |
|---|---|
| Height | 4.3 inches |
| Width | 11.6 inches |
| Net Weight | 4.9 pounds |
Regulatory compliance statement for FCC.
Regulatory compliance statement for EU directives.
Covers basic safety rules for operation, placement, cleaning, and servicing.
Describes the buttons and indicators on the projector unit.
Procedures for powering on the projector and initial setup.
How to enable and set up the projector's password security feature.
Procedures for password recall and what to do if forgotten.
Methods to correct trapezoidal distortion using remote or OSD.
Steps to properly turn off the projector including cooling.
Troubleshooting steps for when no image is displayed.
Solutions for problems with the remote control functionality.
Details for contacting ViewSonic support in different countries.
Explains what the warranty covers and for how long.
Lists exclusions from the warranty coverage.
