ViewSonic PA700W - Menu Navigation

44

The projector has mullingual on-screen display menus that allow for image and
sengs adjustment.
To open the On-Screen Display (OSD) Menu, press the  buon on the
projector or the remote control.
When the OSD is displayed, use the  buons (pq) to select any item
in the main menu. While making a selecon on a parcular page, press the 
buon on the projector or the remote control to enter a sub-menu.
Use the  buons (tu) to select the desired item in the sub-menu
and then press  to view further sengs. Adjust the sengs by using the
 buons (tu).
Select the next item to be adjusted in the sub-menu and adjust as described
above.
Press  to conrm, and the screen will return to the previous menu.
To exit, press the  buon again. The OSD menu will close and the
projector will automacally save the new sengs.