ViewSonic PG703X - User Manual

Questions and Answers:

M
Miss Autumn Jackson MDJul 29, 2025
What to do if ViewSonic Projector remote control does not work?
- A
  aliciafrancoJul 29, 2025
  If your ViewSonic Projector's remote control isn't working, here are a few things to try: * First, replace the battery with a new one. * Make sure there's nothing blocking the path between the remote and the projector. * Ensure you're within 8 meters (26 feet) of the projector. * Finally, check and adjust the remote control code to ensure it's consistent with the projector.
S
Steven MorrisAug 6, 2025
How to fix ViewSonic PG703X that does not turn on?
- D
  Denise BergerAug 6, 2025
  If your ViewSonic Projector isn't turning on, consider these potential causes: * Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
A
Amanda MccarthyAug 13, 2025
Why ViewSonic PG703X has no picture?
- V
  Victoria RamosAug 13, 2025
  If your ViewSonic Projector displays no picture, several factors could be the cause: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify that the projector is correctly connected to the input signal device. * Confirm that the correct input signal is selected using the Source key on the projector or remote control.
T
ttrujilloAug 20, 2025
Why is my ViewSonic PG703X Projector image blurred?
- M
  Michael GutierrezAug 20, 2025
  If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * Adjust the focus of the lens using the focus ring. * Make sure the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector if needed.

ViewSonic PG703X Specifications

General

Throw ratio	1.96 - 2.15:1
Optical zoom	1.1 x
Focal length range	- mm
Matrix size	0.55 \
Matrix type	DMD
Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.19 - 13.11 m
Vertical scan range	23 - 120 Hz
Horizontal scan range	15 - 102 kHz
Projection technology	DLP
Contrast ratio (dynamic)	22000:1
Contrast ratio (typical)	-
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 40 °
RMS rated power	10 W
Lamp power	240 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	15000 h
Placement	Desktop
Product type	Standard throw projector
Product color	Grey, White
Cable lock slot type	Kensington
3D	No
Supported graphics resolutions	1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Composite video in	1
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	350 W
Operating altitude	0 - 1499 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Noise level	- dB
Certification	FCC, cTUVus
Cables included	AC, VGA