42
1. Enter the address of the projector in the address bar of your browser and press
Enter.
1
The main page of the Network Control will appear.
2
3
4
5
6
NOTE:
Accessing the Network Sengs, Email Alert page, or Projector/LAN Firmware
Update page requires the Administrator’s password. The default password is
“0000”.
2. This page allows you to make adjustments to the AMX and SNMP sengs. In the
AMX device discover row, when ON is selected, the projector can be detected
by controllers of AMX connected to the same network. For the details of AMX
Device Discovery, visit the AMX web site at http://www.amx.com/.
To Next Page
Loading...
