PJ1173ViewSonic 59
NETWORK Menu
NETWORK Menu (continued)
Item Description
e-SHOT
Selecting this item displays the e-SHOT
menu.
The application software “PJTransfer”
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
e-SHOT and the ► or ENTER button to display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source le in the projector.
(1) Press the RESET button on the
remote control while displaying
an image to display the e-SHOT -
RESET menu.
(2) Press the ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
To stop erasing, press the ESC button on the remote control or
the ◄ button on the projector.
(continued on next page)
To Next Page
Loading...
