ViewSonic PJ255D - Installation; Connecting the Projector to Devices

1.
Power Cord
2.
VGA Cable
3.
S-Video Cable
4.
Composite Video Cable
Connecting the Projector
v To ensure the projector works well with your computer, please
set the display mode of your graphic card than or equal to
1024 X 768 resolution. Make sure timing of the display mode is
compatible with the projector. Refer to the Compatibility
Modes section on page
S-Video Output
Video Output
1
2
3
4
Installation
ViewSonic PJ255D
8
29.
Downloaded from ProjectorsManual.com Manuals