ViewSonic PJ255D - Adjusting the Projected Image; Adjusting the Projector Height

Adjusting the Projected Image
Adjusting the Projector Height
Tilt Adjusted wheel
Elevator Foot
1
2
3
Elevator Button
The projector is equipped with an elevator foot for adjusting the
projector height.
To raise the projector:
1. Press the elevator button
.
2. Raise the projector to the desired display angle , then
release the button to lock the elevator foot into position.
3. Use
 to fine-tune the display angle.
To lower the projector:
1. Press the elevator button.
2. Lower the projector, then release the button to lock the
elevator foot into position.
3. Use
 to fine-tune the display angle.
ViewSonic PJ255D
11
Downloaded from ProjectorsManual.com Manuals