Problem: Image is out of focus
4
4
Make sure the projection screen is between the required distance
3.94 to 32.81 feet (1.20 to 10.00 meters) from the projector.
Problem: The image is outstretched when displaying 16:9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
4
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
4
If you cant select 4:3 aspect ratio type on your DVD player, please
refer to page 18 to choose 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed.
4
Problem: Lamp burns out or makes a popping sound
4
ViewSonic PJ255D
26
Adjusts the Focus Ring on the projector lens. Refer to page
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following: (See page )
To select Management from the OSD and adjust the projection
direction. See page
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the Changing the Lamp. See
page
12.
17
22.
27.
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
