20ViewSonic PJ458D
Using the Projector
Control Panel
LED
1. POWER (Power LED indicator)
Refer to “Indicator Messages”.
2. LAMP (Lamp LED indicator)
Refer to “Indicator Messages”.
Button Function
1.
Refer to “Powering On/Off the Projector”.
2. MENU \ ENTER
Press the MENU\ENTER button to activate the OSD (On-Screen Display)
menu. Use the directional buttons and MENU\ENTER button to navigate
through the OSD (On-Screen Display) menu and select choices.
3. KEYSTONE (
/
)
Adjusts image distortion caused by tilting the projector.
4. AUTO (
)
Automatically adjusts frequency and phase.
5. Four direction buttons
The four direction buttons
/
/
/
can be used to scroll through OSD (On-
Screen Display) menus and make adjustments.
6. SOURCE (
)
Manually selects an input source.
To Next Page
Loading...
Need help?
General
