EasyManua.ls Logo

ViewSonic PJ656D - User Manual

ViewSonic PJ656D
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
The most trusted, dependable name
in projector lamp sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.

Table of Contents

Questions and Answers

  • L
    Lisa FisherAug 11, 2025
    Why does my ViewSonic PJ656D Projector say 'CHECK THE AIR FLOW'?
    • B
      Brian MeadowsAug 11, 2025
      If your ViewSonic Projector displays a 'CHECK THE AIR FLOW' message, it means the internal temperature is rising. Turn off the projector and let it cool down for at least 20 minutes. Then, check for any blockage of the air passage, ensure the air filter isn't dirty, and confirm the surrounding temperature is below 35°C. If the problem persists, set the FAN SPEED in the SERVICE item of the OPTION menu to HIGH.
  • N
    Nathaniel MarquezAug 25, 2025
    What to do if my ViewSonic PJ656D Projector says 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK'?
    • A
      Andrew NunezAug 26, 2025
      If your ViewSonic Projector shows 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK,' it indicates that filter maintenance is needed. Immediately turn off the projector and clean or change the air filter. After cleaning or replacing the filter, remember to reset the filter timer.

ViewSonic PJ656D Specifications

General IconGeneral
BrandViewSonic
ModelPJ656D
CategoryProjector
LanguageEnglish

Related product manuals