Item Description
SERVICE
REMOTE FREQ.
Use the ▲/▼ button to change the Projector’s remote sensor set
-
ting.
1:NORMAL
2:HIGH
Items with a checkmark are on. The factory default setting is for
both 1:NORMAL and 2:HIGH to be on. If the remote control does
not function correctly set the this to either only 1 or only 2 as de-
scribed in Remote Control Settings.
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT INFORMATION”.
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• The “SCART RGB” message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the
COMPONENT item in this menu.
• This item can’t be selected for no signal and sync out.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME, LAN
-
GUAGE and OPTION_SECURITY are not reset.
RESET
CANCEL
OPTION Menu (continued)
OPTION Menu
43ViewSonic PJ658
To Next Page
Loading...
