Operation 67
Function Description
Lamp
Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 69 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 73 for details.
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 69 for details on
how the total lamp hour is calculated.
Presentation
Timer
See "Setting the presentation timer" on page 38 for details.
Security
Settings
See "Utilizing the password function" on page 24 for details,
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User
1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings.
Current
System
Status
Source
Shows the current signal source.
Color Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
MAC Address
Shows the MAC Address of your projector.
MAC Address stands for Media Access Control Address,
which is a physical layer address used to uniquely identify
a network node.
To Next Page
Loading...
Need help?
General