8
Remote Control
1. Power
Turn the projector on or off.
2. HDMI 1
Display HDMI 1 signal.
3. Video
Switch input source to Composite/S-Video by sequence.
4. Up/Volume +, Down/Volume -
When the On-Screen Display (OSD) menu is not activated, adjust the projector’s
sound level.
5. Left/Mute
When the On-Screen Display (OSD) menu is not activated, this button is used as
mute function.
6. Menu
Display on-screen display menus.
7. User 1
Recall the customized settings based on the current available settings.
8. Source
Display the source selection bar.
9. Gamma
Change the gamma setting.
10. Pattern
Display embedded test pattern.
11. Color Mode
HDMI1 HDMI2 Compo
PC
Video
Swap
Default
Auto
Enter
3
4
4
6
5
7
8
10
12
9
11
13
14
15
17
18
19
20
21
22
23
24
25
16
To Next Page
Loading...
