23
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Color Mode, Gamma, Overscan, Noise
Reduction, Keystone and Filter Mode.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.
Information
Factory Default
Equivalent Lamp Hours
Equivalent Lamp Hours
Reset
Filter Hours*2
Filter Hours Reset*2
Input Source
NetWork
Wired LAN
Status
Disconnect, Connect
On, Off
DNS
Apply
Status
SSID
Connection Mode
Disconnect, Connect
AP, Infrastructure
Wireless LAN
Network Restart
Yes, No
Default Gateway
MAC Address
To Next Page
Loading...
