ViewSonic Pro8600 - Controlling Projector via LAN; Wired LAN Connection

25
*1 Adjustable range and default setting vary depending on signal type.
*2 This function is only available when the projector is installed an optional filter cover.
*3 The selectable Function list includes Brightness, Contrast, Saturation, Color Setting >
Gamma, Overscan, Noise Reduction, Audio Setting, Microphone Volume, Speaker Volume,
Mute, Keystone, Aspect Ratio, Projection, Power Saving, ECO Mode, Filter Mode, Menu
Position, OSD Transparency, Closed Caption, Message, Zoom, DCR and Test Pattern.
*4 Saturation is supported under Component, Video and S-Video modes.
*5 Sharpness is supported under HDMI, Component, Video and S-Video modes.
*6 Tint is supported under Component, Video and S-Video modes.
Information
Factory Default
Lamp Hours
Lamp Hours Reset
Filter Hours*2
Filter Hours Reset*2
NetWork
Wired LAN
Status
Disconnect, Connect
On, Off
DNS
Apply
Status
SSID
Connection Mode
Disconnect, Connect
Wireless LAN
Network Restart
Yes, No
MAC Address
Input Source
Computer 1, Computer 2,
Component, Composite, S-Video,
HDMI, USB A, USB B, LAN
Default Gateway
AP, Infrastructure