ViewSonic Pro8600 - Controlling the Projector through a Web Browser

35
Controlling the projector through a web browser
Once you have the correct IP address for the projector and the projector is on or in standby
mode, you can use any computer that is on the same local area network to control the
projector.
Important
• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
• The screenshots in this manual are for reference only, and may differ from the actual
design.
1. Enter the address of the projector in the address bar of your browser and press
Enter.
2. The main page of the ViewSonic webpage control system appears.
3. To change the language for the web pages, click the down arrow to reveal a drop
down list and select a desired language.
4. To download vsPresenter, click Download. See "Displaying images through
vsPresenter" on page 40 for details.
5. The Crestron (eControl) page displays the Crestron eControl user interface. See
"About Crestron control" on page 36 for details.
6. To have access to the Admin page, you need to enter a password. The default
password is “admin”.
• System Status: Displays the system information.
4
3
5
6