ViewSonic TD2210 User Manual

5
Control of the Touch Function
1. Before using the touch function, make sure the USB cable is connected and the
Windows operating system is started.
2. When the touch function is active, end users must not use sharp-pointed pen or
knife to touch the surface of screen.
NOTE:
1. The touch function may need about 7 seconds to resume if the USB cable is
re-plugged or the computer resumes from sleep mode.
2. The touchscreen can only detect one point touch as the function of mouse
cursor.

ViewSonic TD2210 Specifications

General

Color	black
Tiltable	yes
OS Compatibility	windows
Screen Size	22 inches
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	5 milliseconds
Brightness	350 candela per square meter
Contrast Ratio	20, 000, 000:1
Horizontal Scan Rate	83 kilohertz
Power Consumption	29.5 watts
Depth with Stand	9.4 inches
Width with Stand	20.2 inches
Net Weight without Stand	10.6 pounds