ViewSonic TD2220 User Manual

6
Quick InstallationQuick Installation
1. Connect power cord (and AC/DC
adapter if required)
2. Connect video cable
• Make sure both the LCD display and
computer are turned OFF
• Remove rear panel covers if necessary
• Connect the video cable from the LCD
display to the computer
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
®
Macintosh
adapter, contact ViewSonic Customer
Support.
3. Turn ON LCD display and computer
Turn ON the LCD display, then turn ON
the computer. This sequence (LCD display
before computer) is important.
NOTE: Windows users may receive a
message asking them to install the INF
file. This is on the DVD.
4. Insert the ViewSonic Wizard DVD into
the computer’s DVD drive.
Follow the on-screen instructions. If your
computer does not have a DVD-ROM
drive, please refer to Customer Support
page.
• Wait for the DVD-ROM to auto-start.
NOTE: If the DVD-ROM does not auto-
start: double-click on the DVD-ROM icon
in the Windows Explorer, then double-
click on viewsonic.exe.
• Follow the on-screen instructions.
5. Windows users: Set the timing mode
(resolution and refresh rate)
Example: 1920 x 1080 @ 60 Hz.
For instructions on changing the
resolution and refresh rate, see the
graphics card’s user guide.
Installation is complete. Enjoy your new
ViewSonic LCD display.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in “For
Your Records” on page 4. (See back of
LCD display.)
You can register your product online at the
ViewSonic website for your region. See
the Customer Support table in this guide.
The ViewSonic Wizard DVD-ROM also
provides an opportunity for you to print
the registration form which you may mail
or fax to ViewSonic.
Power Cord
AC Outlet
(Wall Socket)
Audio In
AC IN
Computer Power Cord
DVI
D-Sub
USB UP
USB DOWN

ViewSonic TD2220 Specifications

General

Full HD	Yes
Dimensions (WxDxH)	511 x 66 x 310 mm
Display viewable area (HxV)	477.5 x 269.2 mm
Dimensions (W x D x H) with stand	511 x 240 x 635 mm
Mean time between failures (MTBF)	40000 h
3D	No
Aspect ratio	16:9
Screen shape	Flat
Backlight type	W-LED
Display diagonal	21.5 \
Touchscreen type	Tabletop
Display brightness	200 cd/m²
Display technology	LED
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	20000000:1
Contrast ratio (typical)	1000:1
Display diagonal (metric)	54.61 cm
Viewing angle, horizontal	170 °
Digital vertical frequency	50 - 76 Hz
Digital horizontal frequency	24 - 83 kHz
Certification	CE, CB, BSMI, PSB, SASO, C-tick, e-standby, KC, UL/cUL, FCC-B (ICES003), UL CoC, Mexico Energy, GOST-R/Hygienic, UkrSEPRO, TCO 5.2, Erp, CCC, China Energy, EPEAT Silver, WEEE, RoHS, SVHC
Product color	Black
Compatible operating systems	Windows 7
Audio input	1
USB Type-A downstream ports quantity	2
Tilt angle range	20 - 5 °
Panel mounting interface	100 x 100 mm
AC input voltage	110 - 240 V
Power supply type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	26 W
Power consumption (PowerSave)	18 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 90 %
Package weight	6450 g
RMS rated power	4 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	240 mm
Width (with stand)	511 mm
Height (with stand)	635 mm
Weight (with stand)	4920 g
Weight (without stand)	3960 g