Name: ViewSonic TD2430
Brand: ViewSonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Wall Mounting (Optional)

NOTE: For use only with UL Listed Wall Mount Bracket.

To obtain a wall-mounting kit or height adjustment base, contact ViewSonic

your local dealer. Refer to the instructions that come with the base mounting kit.

To convert your display from a desk-mounted to a wall-mounted display, do the

following:

1. Find VESA compatible wall-mounting kit which meets the quaternions below,

Max

Hole pattern

(W x H; mm)

Interface Pad

(W x H x D)

Pad Hole

Screw Q’ty &

Specication

14kg

100mm x

100mm

115 mm x

2.6 mm

Ø 5mm

4 piece

M4 x 10mm

2. Verify that the power button is turned Off, then disconnect the power cord.

Lay the display face down on a towel or blanket.

4. Remove the base. (Screws removal might be required.)

Attach the mounting bracket from the wall mounting kit using screws of the

appropriate length.

6. Attach the display to the wall, following the instructions in the wall-mounting kit.

Questions and Answers:

Need help?

Do you have a question about the ViewSonic TD2430 and is the answer not in the manual?

ViewSonic TD2430 Specifications

General