ViewSonic VE150M - Do the Following to Adjust the Screen Image

3.2 Do the following to adjust the screen image:
1. To display the Main Menu, press button [1]. From the Main Menu
you can also navigate to the other menus shown below:
NOTE: All OnView menus and adjustment screens disappear
automatically after about 15 seconds.
2. To select a control you want to adjust, press Ÿ or ź to scroll up or
down the Main Menu.
3. After the control is selected, press button [2].
4. To adjust the control, press the up Ÿ or down ź buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
z Adjust your computer's graphic card so that it outputs a video
signal 1024 x 768 @ 60Hz to the VE150m. (Look for
instructions on "changing the refresh rate" in your graphic
card's user guide.)
z Select Image Adjust. (Button [2] on the LCD Display control.)
z If necessary, make small adjustments using H POSITION and
V POSITION until the screen image is completely visible
. (The
black border around the edge of the screen should barely touch
the illuminated "active area" of the LCD Display.)
ViewSonic Corporation
16
Confidential --Do Not Copy VE150m/mb