To Next PageTo Next PageHow to fix a ViewSonic Monitor with no power?
If your ViewSonic Monitor isn't turning on, ensure it's switched on using the power button. Verify that the power cord is correctly and securely plugged into the monitor and the power outlet. To confirm the outlet is working, plug another electrical device into it.
Why some menus are not selectable in the OSD on ViewSonic Monitor?
If some menus are not selectable in the OSD of your ViewSonic Monitor, try restarting the computer. If that doesn't help, adjust the ViewMode or the input source. You can also reset the monitor to factory settings.
How to fix no audio output on ViewSonic VG2456 Monitor?
If there is no audio output from your ViewSonic Monitor, and you're using headphones, ensure the mini stereo jack is properly and securely connected. Also, make sure the volume is not muted or set to 0. Finally, check the Audio Input setting.
Why USB devices connected to ViewSonic VG2456 Monitor do not work?
If USB devices connected to the ViewSonic monitor do not work, ensure the USB cable is connected properly. Try changing to a different USB port, if available. Some USB devices require a higher electric current, so connect the device directly to the computer.
General| Color | black |
|---|---|
| Screen Type | led |
| Tiltable | yes |
| Wall Mount | 100mm x 100mm |
| Touch Screen | no |
| Webcam | no |
| OS Compatibility | windows |
| Screen Size | 23.8 inches |
| Panel Type | ips |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Native Resolution | 1920 x 1080 |
| Refresh Rate | 60hz |
| Horizontal Viewing Angle | 178 degrees |
| Vertical Viewing Angle | 178 degrees |
| Response Time | 5 milliseconds |
| Brightness | 250 candela per square meter |
| Contrast Ratio | 1000:1 |
| Synchronization | not applicable |
| Horizontal Scan Rate | 82 kilohertz |
| HDR | no |
| Built-In Speakers | yes |
| HDMI Ports | 1 |
| USB Type B Ports | 1 |
| Display Port Inputs | 1 |
| Power Consumption | 13.7 watts |
| Depth with Stand | 8 inches |
| Height with Stand | 16 inches |
| Width with Stand | 21.2 inches |
| Depth without Stand | 2 inches |
| Height without Stand | 12.6 inches |
| Net Weight without Stand | 14.1 pounds |
Step-by-step instructions for attaching the monitor stand to the display unit.
Instructions for connecting the monitor to a power source.
Guide to connecting various external devices via HDMI, DisplayPort, USB, and Ethernet.
Simple steps to power the monitor on and off using the power button.
Common issues and their solutions for the monitor.
