ViewSonic VG275 - Initial Setup; Installing the Stand

10
Inial Setup
This secon provides detailed instrucons for seng up your monitor.
NOTE: The monitor comes packaged in a user friendly box to make installaon
easy.
Installing the Stand
1. Place the box on a at, stable surface and open the front ap of the box to reveal
the contents. Remove the top tray.
2. Remove the monitor stand’s base and neck. Align and connect the three (3)
points on the monitor stand’s base with the monitor stand’s neck.
3. Use the captured screw in the monitor stand’s base and secure it to the monitor
stand’s neck.
1
2