ViewSonic VG3456 User Manual

10
Inial Setup
This secon provides detailed instrucons for seng up your monitor.
NOTE: The monitor comes packaged in a user friendly box to make installaon
easy.
Installing the Stand
1. Place the box on a at, stable surface and open the front ap of the box to reveal
the contents. Remove the top tray.
2. Remove the monitor stand’s base and neck. Align and connect the three (3)
points on the monitor stand’s base with the monitor stand’s neck.
3. Use the captured screw in the monitor stand’s base and secure it to the monitor
stand’s neck.
1
2

ViewSonic VG3456 Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	34 inches
Panel Type	mva
Aspect Ratio	21:9
Resolution	3440 x 1440
Native Resolution	3440 x 1440
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	50, 000, 000:1
Synchronization	vsync
Horizontal Scan Rate	150 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	2
USB Type B Ports	1
Display Port Inputs	1
Headphones Output	no
Voice Assistant	no
Power Saving Mode	0.3 watts
Power Consumption	160 watts
Depth with Stand	9 3/10 inches
Height with Stand	21 1/5 inches
Width with Stand	32 1/2 inches
Depth without Stand	2 inches
Height without Stand	14 2/5 inches
Net Weight without Stand	13.5 pounds