ViewSonic VG3456 - Wall Mounting

13
Wall Mounng
NOTE: Only use UL Cered wall mount kits.
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole paern
(W x H)
Interface Pad
(W x H x D)
Pad
Hole
Screw Specicaon
& Quanty
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 10 mm
4 pieces
NOTE: Wall mount kits are sold separately. To obtain a wall mounng kit,
contact ViewSonic® or your local dealer.
1. Turn o the device and disconnect all cables.
2. Place the device on a at, stable surface, with the screen facing down.
3. Push and hold the quick release tab and carefully li the stand.
4. Pull down slightly to disengage the hooks and remove the stand.