What to do if the OSD Menu does not appear on the ViewSonic screen?
If the OSD Menu does not appear on your ViewSonic monitor, check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. If the issue continues, reset the monitor to factory settings.
Why is there no audio output from my ViewSonic Monitor?
If there's no audio output from your ViewSonic monitor, and you are using ear-/headphones, ensure the mini stereo jack is connected. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
Why are USB devices not working when connected to my ViewSonic VG3456A Monitor?
If USB devices connected to your ViewSonic monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port (if applicable). If problems persist, connect the device directly to the computer, as some USB devices require a higher electric current.
Why are some menus not selectable in the OSD of my ViewSonic Monitor?
If some menus aren’t selectable in the OSD of your ViewSonic monitor, adjust the ViewMode or the input source. If this doesn't work, reset the monitor to factory settings.
General| Screen Size | 34 inch |
|---|---|
| Resolution | 3440 x 1440 |
| Panel Type | IPS |
| Aspect Ratio | 21:9 |
| Brightness | 300 cd/m² |
| Contrast Ratio | 1000:1 |
| Dynamic Contrast Ratio | 50M:1 |
| Connectivity | HDMI, DisplayPort, USB-C |
| Speakers | Yes |
| Height Adjustment | Yes |
| Tilt | Yes |
| Swivel | Yes |
| VESA Mount | 100 x 100 mm |
| Curvature | Flat |
| Response Time | 5ms |
| Viewing Angles | 178 degrees horizontal, 178 degrees vertical |
| Ports | HDMI, DisplayPort, USB-C |
To Next Page
