ViewSonic VOT125 - Boot Menu; Table 9 Boot Menu

ViewSonic
VOT125 18
 Boot Menu
Table 9 Boot Menu
BIOS SETUP UTILITY
Main Advanced Boot Chipset Power Security Exit
Boot Settings
> Boot Device Priority
Quick Boot [Enabled]
Full Screen LOGO Display [Enabled]
Bootup Num-Lock [ON]
Wait For ’F1’ If Error [Enabled]
Hit ’F2’Message Display [Enabled]
Specifies the Boot
Device Priority
sequence.
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Boot Device Priority
The items allow you to specify the Boot Device Priority sequence.
Quick Boot [Enabled]
Enabling this item allows BIOS to skip some Power On Self Tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items.
Options: Disabled, Enabled
Full Screen LOGO Display [Enabled]
Options: Disabled, Enabled
Bootup Num-Lock [On]
Allow you to select the power-on state for the NumLock.
Options: Off, On
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when error occurs.
Options: Disabled, Enabled
Hit ‘F2’ Message Display [Enabled]
When set to Enabled, the system displays the message ‘Press DEL to run Setup’
during POST.
Options: Disabled, Enabled