defaults. You should do “All Mode Reset” again.
1.5.15 Power Off Monitor
Turn off the monitor by pressing “Power” button.
2. Firmware Upgrade Procedure
When you receive the returned monitor, please check whether the firmware version is the latest.
If not, please do the following procedures to upgrade it to the latest version.
2.1 Equipment Needed
- VP930/B(3) Monitor
- Fixture for Firmware Upgrade
- VGA Cable
- PC (Personal Computer)
- LPT Cable
- Firmware Upgrade Program
- One additional monitor for checking the program execution
PC
VGA Cable
Printer Por
t
LPT Cable
VP930/B(3)
ViewSonic Corporation Confidential - Do Not Copy VP930-3_VP930b-3
25
To Next Page
Loading...
