What to do if Q102 1.8V SUROUND CAP is not OK on ViewSonic Monitor?
- WWesley VargasAug 2, 2025
If the Q102 1.8V SUROUND CAP on your ViewSonic Monitor isn't working, verify that the BEAD is functioning correctly.
What to do if Q102 1.8V SUROUND CAP is not OK on ViewSonic Monitor?
If the Q102 1.8V SUROUND CAP on your ViewSonic Monitor isn't working, verify that the BEAD is functioning correctly.
What to do if 3.3V N CHECK I102, SUROUND CAP is not OK on ViewSonic VP930b-3 Monitor?
If the I102, SUROUND CAP on your ViewSonic Monitor isn't working, verify that the BEAD is functioning correctly.
What to do if the power board is not OK on ViewSonic VP930b-3?
If the power board on your ViewSonic Monitor isn't working, verify the MAIN BOARD.
Guidelines for safe operation, caution against modifications, and safety checks.
Detailed precautions for handling LCD modules and correct placement methods.
Requirements, signal interface, power details, and audio status.
Electrical requirements, timing, dimensions, weight, ergonomics, and environmental conditions.
Description of the main menu, front panel controls, and OSD functions.
Details on manual image adjustments, setup menu options, and information display.
Introduction to the TSUM66AJ scaler IC and its core features.
Detailed pin assignments for Analog, DVI, LVDS, and GPIO interfaces.
Interface characteristics, max ratings, and inverter function.
Steps for function testing, adjustment, and display modes.
Procedures for upgrading firmware and performing DDC key-in.
Steps for disassembling the monitor and packing it for shipping.
Flowcharts for diagnosing and resolving issues like no power, no display, and color loss.
Lists of recommended spare parts for VP930-3 and VP930b-3.
Detailed BOM and exploded parts lists for VP930-3 and VP930b-3.
Lists of packing contents and exploded diagrams.
Overall system block diagram illustrating component interactions.
Detailed electronic schematics for various circuits.
Visual layouts of the main and connector PCBs (top and bottom views).