2.2 Setup Procedure
2.2.1 Connect P2 of Fixture with printer port of PC by LPT Cable.
2.2.2 Connect P1 of Fixture with Monitor by VGA Cable.
2.2.3 Connect Power Cord to Monitor.
2.2.4 Connect PC to the additional monitor.
I. ISP Download program procedure
1 Hardware Connect status:
2 Down load isp program
First :Open ISP software (Mstar ISP Utility).
You will see the interface as below.
Second: select IC chip from device.
Press the button of “Device”, select chip. Choose Pm25LV010.
You can see Mfr. and size.
ViewSonic Corporation Confidential - Do Not Copy VP930-3_VP930b-3
26
To Next Page
Loading...
