3.Connect RS-232 Cable and VP930/B(3) with VGA Cable.
4.(when key in DVI DDC information, use VGA transform to DVI port )
5.Connect Power Cord to VP930/B(3) Monitor.
3.3 DDC Key In Procedure
1.Run DDC.exe
2.Choose model number and conform the Time then Press “ENTER” key.
3.When appear the PIC “ choose DDC Card”, Press ALT+2 .Enter DDC 2B test interface.
Choose DDC Card
ViewSonic Corporation Confidential - Do Not Copy VP930-3_VP930b-3
30
To Next Page
Loading...
