3. DDC Key In Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the monitor, you have to do the DDC key in.
3.1 Equipment Needed
- VP930/B(3) Series Monitor
- DDC Card
- PC
- RS232 cable
- DVI-DVI Cable
- Barcode Reader
- VGA Cable
3.2 Setup Procedure
1.Connect VGA Card and DDC Card with RS-232 cable.
2.Barcode Reader connect with keyboard and PC keyboard port.
VP930/B(3)
DDC Card PC
RS-232 Cable
DVI-DVI Cable
Barcode Reader
VGA Cable
ViewSonic Corporation Confidential - Do Not Copy VP930-3_VP930b-3
28
To Next Page
Loading...
