To Next PageTo Next PageWhat to do if ViewSonic VS15871 remote control does not work?
If your ViewSonic Projector's remote control isn't working, here are a few things to try: * First, replace the battery with a new one. * Make sure there's nothing blocking the path between the remote and the projector. * Ensure you're within 8 meters (26 feet) of the projector. * Finally, check and adjust the remote control code to ensure it's consistent with the projector.
How to fix ViewSonic Projector that does not turn on?
If your ViewSonic Projector isn't turning on, consider these potential causes: * Ensure the power cord is securely plugged into both the AC inlet on the projector and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
Why ViewSonic Projector has no picture?
If your ViewSonic Projector displays no picture, several factors could be the cause: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify that the projector is correctly connected to the input signal device. * Confirm that the correct input signal is selected using the Source key on the projector or remote control.
Why is my ViewSonic VS15871 Projector image blurred?
If you're experiencing a blurred image with your ViewSonic Projector, here's what you can do: * Adjust the focus of the lens using the focus ring. * Make sure the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector if needed.
General| Native Resolution | XGA (1024x768) |
|---|---|
| Zoom Ratio | 1.1x |
| Contrast Ratio | 22000:1 |
| Keystone Correction | ±40° (Vertical) |
| Inputs | HDMI, VGA, Composite Video |
| Outputs | VGA x1 |
| Projection Size | 30 - 300 in. |
Device compliance with FCC Rules, operation conditions, and interference guidelines.
Device compliance with EMC and Low Voltage Directives for EU.
Crucial safety guidelines for projector operation, handling, and environment.
Specific safety advice for mounting the projector to a ceiling securely.
Copyright notice and intellectual property rights statement.
ViewSonic's disclaimer regarding technical errors, omissions, and product improvements.
Section to record product name, model, serial number, and purchase date.
Overview of the projector's key features and capabilities for high-quality projection.
List of standard accessories included with the projector for different regions.
List of optional accessories available for purchase to enhance projector functionality.
Identification of external controls and ports on the front and top of the projector.
Identification of external controls and ports on the rear and bottom of the projector.
Detailed description of buttons and functions on the projector's control panel.
Explanation of buttons and their functions on the projector's remote control.
Information on setting and changing remote control codes to avoid interference.
Guidance on selecting the optimal location for projector installation based on room layout.
Detailed tables of projection dimensions for various screen sizes and aspect ratios.
Diagrams and data for projection dimensions with different aspect ratios.
Instructions for connecting a computer to the projector using VGA and USB cables.
Steps to connect the projector's MONITOR OUT to an external display.
Recommends HDMI for best video quality, followed by Component video.
Suggests S-Video for better analog video quality compared to composite.
Explains Composite Video as the lowest quality analog video connection.
Details on projector's mono speaker and audio output for presentations.
Step-by-step guide for powering on the projector and initial setup.
Overview of the OSD menu structure and available options based on signal type.
Procedure for selecting the preferred OSD language for the projector.
Steps to set up a password for security and prevent unauthorized use.
Information on what happens if the password is forgotten and how to proceed.
Using the adjuster foot to fine-tune the projector's height and angle.
Using Auto Sync to optimize picture quality by adjusting frequency and clock.
Explanation of different aspect ratio settings and their visual representation.
Choosing predefined picture modes (Brightest, Dynamic, Standard, Movie) for different environments.
Controlling image brightness for optimal visibility in dark and light areas.
Setting peak white levels for enhanced contrast after brightness adjustment.
Adjusting color saturation for natural or vibrant image tones.
Adjusting the green/red balance for accurate skin tones and color representation.
Controlling image sharpness for clear details or softer picture.
Enhancing image brightness and color vibrancy using a special algorithm.
Setting the duration for the presentation timer.
Configuring how and when the timer is displayed on screen.
Selecting the on-screen position for the presentation timer.
Setting the timer to count up or count down.
Enabling audio alerts for timer countdowns and completion.
Steps to start the presentation timer after configuration.
Procedure for disabling the presentation timer function.
Steps to mute or unmute the projector's audio output.
Controlling the volume of the projector's audio output.
Disabling the audible tone that plays when the projector powers on or off.
Overview of the OSD menu structure and available options based on signal type.
Menu items for display settings like aspect ratio, keystone, and zoom.
Menu items for picture adjustments like color, brightness, and contrast.
Menu items for selecting input sources and managing signal settings.
Basic system settings including language, projector position, and timers.
Advanced system settings like high altitude mode, DCR, and audio configuration.
Guidelines for cleaning the projector lens and case to maintain performance.
Recommendations for storing the projector properly for extended periods.
Instructions for installing the dust filter and setting the filter mode.
Procedure for cleaning the dust filter to maintain its effectiveness.
Steps to reset the dust filter timer after cleaning or replacement.
How to check the total operating hours of the projector lamp.
Settings and practices to maximize the projector lamp's lifespan.
Using Economic mode to reduce power consumption and extend lamp life.
Configuring automatic shutdown when no input signal is detected.
Setting a timer for automatic projector shutdown.
Common causes and remedies for the projector failing to power on.
Troubleshooting steps for when no image is displayed on the screen.
Solutions for unfocused or misaligned projected images.
Steps to resolve issues with the projector's remote control not functioning.
Technical details including resolution, lamp, electrical, mechanical, and terminals.
Details of the projector's output ports for audio, video, and RGB signals.
Specifications for RS-232 serial control and other control interfaces.
Operating temperature, humidity, and altitude specifications for the projector.
Timing chart detailing resolutions, aspect ratios, and refresh rates for Analog RGB signals.
Timing chart for HDMI signals, including resolutions, aspect ratios, and refresh rates.
Timing chart for 3D signals, covering various formats and refresh rates.
Details on 3D formats (Frame Packing, Side-by-Side, Top-Bottom) for HDMI.
Timing chart for Component Video signals, listing resolutions, aspect ratios, and refresh rates.
Timing chart for Composite Video signals, including NTSC, PAL, and SECAM standards.
Copyright notice and legal restrictions on use and reproduction of the manual.
ViewSonic's disclaimer regarding product specifications and liability.
Table mapping remote control keys to their corresponding IR command codes.
Pin assignments and interface specifications for RS232 communication.
RS232 commands for controlling power, resets, and splash screens.
RS232 commands for adjusting aspect ratio, brightness, contrast, and color.
RS232 commands for HDMI settings, CEC, and brilliant color adjustments.
RS232 commands for remote codes, screen color, overscan, and input selection.
RS232 commands for setting language and managing lamp time.
ViewSonic's warranty for material and workmanship defects under normal use.
Details on general and heavy usage warranty periods for parts and labor.
Specifies that the warranty is valid only for the first consumer purchaser.
Lists items and conditions excluded from warranty coverage, like misuse or damage.
Instructions on obtaining warranty service, including required documentation and shipping.
Details on the limitations of express or implied warranties.
ViewSonic's liability limitations for various types of damages.
Explanation of how local laws may affect warranty rights and exclusions.
Warranty information for products sold internationally and in specific regions.
Warranty for material and workmanship defects under normal use in Mexico.
Details on warranty periods for parts, labor, and lamp in Mexico.
Lists conditions and items excluded from the Mexico limited warranty.
Instructions on obtaining warranty service in Mexico, including required documentation.
Section for recording product details to support warranty claims in Mexico.
Details of the manufacturer and importer for the Mexican market.
Toll-free technical assistance number for all of Mexico.
