ViewSonic VSR100 - Network Management; Admin Setting

16
Network Management
• Scan 5G SSID and Connect
Connecting EZCast Pro Dongle II to preferred networking by selecting SSID and
entering Wi-Fi password. After setting up, the user may utilize wireless function
such as online video streaming, web browsing, etc.
• WiFi IP Seng
With this function, EZCast Pro Dongle II will set up a default IP address, Netmask.
For an advanced setting, the user may manually configure the IP address,
Gateway, Netmask, and DNS for EZCast Pro Dongle II.
• WiFi Password
Setting Wi-Fi password for EZCast Pro Dongle II. A user may decide whether to
hide the Wi-Fi password from the standby screen.
• WiFi Channel
User may configure WiFi Channel manually, such as Country, Channel, and
Bandwidth. Please note that user won’t be able to switch WiFi Channel when
EZCast Pro Dongle II is connected with an external router.
Admin Seng
Admin Seng is built for advanced users like IT admins, MIS engineers. In this
secon, premium users are allowed to provide Digital cercate for EZCast Pro
Dongle II, seng SNMP for mass devices conguraon deployment, updang
EZCast Pro Dongle II through OTA Server, etc.
• Admin Password
Setting New Admin Password for EZCast Pro Dongle II.
• WiFi Enterprise
Wi-Fi Enterprise function allows user uploading Digital certificate.
• Host Authority
Specifying Host user authorization, including Conference Control, Device
manager control, Network setup control, and Reboot control.