15
ENGLISH
Using the TV Features
ENTER
:Press to Execute:Move
Storing Channels into Memory
1. Press the MENU button to display the OSD main menu.
2. Press ◄ or ► to select the “CHANNEL” menu, then
press ENTER to enter the menu. Press ▲ or ▼
to select “Signal Type”, and use ◄ or ► to select the
antenna connection to “Air” or “Cable”.
Air: RF signal programs by “Air”.
Cable: RF signal programs by “Cable”.
3. Press ▲ or ▼ to select “Auto Scan”, then press ENTER
to enter.
4. The Auto Scan screen will be shown, and after it is
done, the screen will return to the rst found channel.
Selecting the Input Source
To select the TV or other external input sources connected
to the TV.
1. Press the INPUT button on the remote control.
2. Press ▲ or ▼ to select the required input source between
TV, AV, YPbPr, HDMI, PC or Media.
(When in USB input source, the system only
supports JPEG and MP3 image les.)
3. To conrm the selection, press ENTER.
To Next Page
Loading...
Need help?
General
