ViewSonic VT2216-L - Connecting the LCD TV; Cable System or VHF;UHF Antenna System; Cable System and VHF;UHF Antenna System; HD Cable Box;Hd Satellite Box

Getting Started
7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoythehigh-denitionandstandard-denitiondigitalprogrammingalongwithstandard-denition
analog programming.
☼
•This TV is capable of receiving unscrambled digital programming for both cable and external VHF/
UHF antenna.
•We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable
(not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear side of the TV
VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming, as shown below.
Cable
Antenna
Rear side of the TV
VHF/UHF/CABLE input
A-B RF switch
☼
•Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.
HD Cable Box/HD Satellite Box
Youcanalsoenjoyhigh-denitionprogrammingbysubscribingtoahigh-denitioncableserviceor
ahigh-denitionsatelliteservice.Fortheoptimumpicturequality,besuretoconnectthisdeviceto
your TV via the HDMI or component video (with audio) input on the rear side of your LCD TV.
HDMI Connection
HDMI cable
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT
OUT
IN
AUDIO
L
R
Pb
LINE OUT
TV
IN
HDMI IN EARPHONE
OUT
HDMI cable
HD cable box /
HD satellite box
CATV / Satellite antenna cable
Rear side of the TV