ViewSonic VT2216-L - RoHS2 Declaration and Copyright

ii
Declaration of RoHS2 Compliance
ThisproducthasbeendesignedandmanufacturedincompliancewithDirective2011/65/EUofthe
European Parliament and the Council on restriction of the use of certain hazardous substances in
electricalandelectronicequipment(RoHS2Directive)andisdeemedtocomplywiththemaximum
concentrationvaluesissuedbytheEuropeanTechnicalAdaptationCommittee(TAC)asshown
below:
Substance
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr
6+
) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1% < 0.1%
CertaincomponentsofproductsasstatedaboveareexemptedundertheAnnexIIIoftheRoHS2
Directives as noted below:
Examples of exempted components are:
1. Mercuryincoldcathodeuorescentlampsandexternalelectrodeuorescentlamps(CCFLand
EEFL) for special purposes not exceeding (per lamp):
(1)Shortlength(≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Leadinglassofuorescenttubesnotexceeding0.2%byweight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Leadinhighmeltingtemperaturetypesolders(i.e.lead-basedalloyscontaining85%byweight
or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other than dielectric
ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.