ViewSonic VT2216-L - Channel, Volume, and Input Management

Using the TV Features
14
Operation
Turning the TV On and Off
Press
on the remote control.
You can also use the
key on the front side of the panel.
j If there is no input signal within 10 minutes, TV will be turned off
automatically.
Initial Setup
If an antenna or cable (without a cable box) is connected to your
TV’stuner,youwillneedtogothroughanINITIALSETUPprocess
in order to watch the TV. The setup wizard will automatically start
whenyourstturnontheTV.
1.Press◄or►buttontoselecttheMenu Language preference.
2.Press▲or▼buttontoselecttheoptionsyouwanttoadjust
andPress◄or►buttontochangeitsvalue.
3.Press◄or►buttonstoselectyourconnectiontypebetween
 Air(antenna)orCableandpressENTER to scan for channels.
4. The channel scan may take a while to complete, and after it is
done,thescreenwillreturntotherstfoundchannel.
Please Note:
j The time setting on the TV will only keep accurate time if
you do not unplug or turn off standby power from the TV.
j NotallbroadcastsareinHighDenition(HD).Pleasereferto
your local broadcasting stations for more information.
j TheHDTV’stunerisdesignedforHDTVthereforerequiresa
stronger signal than normal TVs. If you cannot achieve that
signallevelwithyourantennaorcable,yourHDTVmightlose
picture or sound.
j ViewSonic wants to help you save energy! This HDTV meets
the ENERGY STAR® guidelines under the default picture
setting called POWER SAVING. Changing this setting or
enabling other options will increase power consumption
which could possibly exceed the guidelines of ENERGY STAR®.