ViewSonic VT2216-L - Page 29

Using the TV Features
20
Changing Password
To change a new password:
1. Press MENU to display the OSD main menu.
2.Press◄or►toselectLockmenu,thenpressENTERtoenter
the menu.
3. Enter the password.
4.Press▲or▼toselectChange Password,thenpress►toenter
its submenu.
5.EntertheoldpasswordonOld PIN.
6. Enter your new password on New PIN.
7. Enter your new password again on Conrm.
The screen will return to the Lock menu. This indicates the
password has been changed.
8. Press EXIT to exit the menu.
Blocking Selected Input Source
To block the selected input source:
1. Press MENU to display the OSD main menu.
2.Press◄or►toselectLock menu, then press ENTER to enter
the menu.
3. Enter the password. (Default password is 0000)
4.Press▲or▼toselectInput Block, then press ENTER to enter
its submenu.
5.Press▲or▼toselecttheinputsourcethatyouwanttoblock.
6. Press ENTERtoconrm.
Press◄or►toselect(Unblock/Block).
7. Press EXIT to exit the menu.