Other Information
46
ViewSonic VT2405LED
ENGLISH
§ Table 5-1 outlines the Get-function command list that must be supported by the LCD
Monitor.
Table 5-1: PC Get-function command to LCD Monitor
Get Function Command
Code
(ASCII)
Command
Code
(Hex)
Response Range
(Three ASCII bytes)
Comments
Get-Contrast a 61 000 ~ 100 Gets Contrast value
Get-Brightness b 62 000 ~ 100 Gets Brightness value
Get-Sharpness c 63 000 ~ 100 Gets Sharpness value
Get-Color d 64 000 ~ 100 Gets Color value
Get-Tint e 65 000 ~ 100 Gets Tint value
Get-Volume f 66 000 ~ 100 Gets Volume value
Get-Mute g 67 000: OFF (unmuted)
001: ON (muted)
Gets Mute ON/OFF status
Get-Input select j 6A 000: TV
001: AV
002: SV
003: YPBPR
004: HDMI 1 / PC
005: HDMI 2
006: VGA
Gets Input select status
Get-Power status l 6C 000: STBY
001: ON
Gets the status of the HDTV power.
HDTV response:
000 = HDTV is in standby
001 = HDTV is ON
Get-Remote
Control
n 6E
000: DISABLE
001: ENABLE
002: PASS
THROUGH
Disable: RCU has no effect on HDTV.
Enabled: RCU controls the HDTV. This
is the power up default on the HDTV.
Pass through: RCU has no effect on
HDTV and all RCU command codes are
transmitted to FC via the RS232 port. See
page 51 for more details
Get-Power Lock o 6F 000: Unlock
001: Lock
Get-Button Lock p 70 000: Unlock
001: Lock
Get-Menu Lock q 71 000: Unlock
001: Lock
Get-ACK z 7A 000 This command is used to test the
communication link.
To Next Page
Loading...
