Personal Computer
Use the LCD TV as the monitor of your computer.
The picture below shows the connection for PC. The LCD TV can also be connected to PC
with DVI or HDMI output.
☼
• Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
• If the PC is connected to TV and no signal has been input from PC for more than 5 seconds,
the TV will enter standby mode automatically.
PC Timing Reference Chart
Mode Aspect Ratio Handling Compatible Input
Standard Resolution FS*Full-Screen RGB
720 x 400 @ 70Hz 1920x1080 Yes
VESA 640 x 480 @ 60Hz 1920x1080 Yes
VESA 640 x 480 @ 75Hz 1920x1080 Yes
VESA 800 x 600 @ 60Hz 1920x1080 Yes
VESA 800 x 600 @ 75Hz 1920x1080 Yes
MAC 832 x 624 @ 75Hz 1920x1080 Yes
VESA 1024 x 768 @ 60Hz 1920x1080 Yes
VESA 1024 x 768 @ 75Hz 1920x1080 Yes
VESA 1280 x 1024 @ 75Hz 1920x1080 Yes
VESA 1360 x 768 @ 60Hz 1920x1080 Yes
VESA 1440 x 900 @ 60Hz 1920x1080 Yes
VESA 1680 x 1050 @ 60Hz 1920x1080 Yes
VESA 1920 x 1080 @ 60Hz 1920x1080 Yes
☼
• This TV’s PC VGA input does not support interlaced signals.
• For the best picture quality, we recommend that you use the signals (boldfaced) in the
above chart with a 60 Hz vertical frequency from a personal computer.
• Preset Timing Mode (Pre-adjusted to GTF® 1920 x 1080 @ 60 Hz)
Note: Simultaneously press “MENU” and “CH▼” keys on TV panel to switch between
similar PC timings.
Similar PC Timing on list below:
• 640 x 400 @ 70Hz / 720 x 400 @ 70Hz
• 1280 x 768 @ 60Hz / 1360 x 768 @ 60Hz
• 1680 x 1050 @ 60Hz / 1400 x 1050 @ 60Hz
• 1600 x 900 @ 60Hz / 1440 x 900 @ 60Hz
Rear of TV
Audio cable (stereo mini plugs)
VGA 15 Pin cable
Connect to an HDMI compatible PC
with the HDMI cable.
To Next Page
Loading...
Need help?
General