ViewSonic Corporation
10
Main Menu Control
Adjust the menu items shown below by using up ▲ or down ▼ buttons.
Control explanation:
Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness
and distortion.
Press the [2] button to obtain a shaper image.
Note: 1. Auto Image Adjust works with most common video card. If this function does not work on
your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.
2.The Auto Image Adjust and most Manual image Adjust functions are not available for DVI input
Contrast adjusts the different between the image background (black level) and the
fore
.
Brightness adjusts background black level of the screen image.
Input Select allow you to toggle between an analog and a digital signal.
Color Adjust provides several color adjustment modes: preset color temperature and RGB which
allow you
to adjust red (R), green (G), blue (B) separately. The factory setting for this product is
6500K (6500 Kelvin).
sRGB — sRGB is quickly becoming the industry standard for color management, with support
being included in many of the latest applications. Enabling this setting allows the LCD display to
more accurately display colors the way they were originally intended. Enabling the sRGB setting
will cause the Contrast and Brightness adjustments to be disabled.
9300K — Adds blue to the screen image for cooler white (used in most office setting with
fluorescent lighting).
6500K — Adds red to the screen image for warmer white (used in most office setting with
fluorescent li
To Next Page
Loading...
Need help?
General
Weight and Dimensions
