ViewSonic X10-4K - Page 80

80
Menu 
Light Source Level Select the suitable power consumpon of the LED.
Full
100%
Eco
70%
High Altude Mode It is recommended that you use High Altude
Mode when your environment is between 1,500-
3,000 m above sea level, and a temperature
between 5°C-25°C.
 If you use this projector under other
extreme condions excluding the
above, it may display auto shut-down
symptoms, which is designed to protect
your projector from over-heang. In
cases like this, you should switch to High
Altude Mode to solve these symptoms.
However, this is not to state that this
projector can operate under any and all
harsh or extreme condions.
Reset Sengs Reset the Sengs to default.
 Language, High Altude Mode, Projector
Posion, Network Sengs, All installed
Apps in the Apps Center, Add App,
and Light Source Hours will remain
unchanged.
Reset to Factory Default Factory reset.
 Light Source Hours will remain
unchanged.